Setting up an above-ground pool for the first time has a specific order of operations - skip steps or do them out of sequence and you'll pay for it later. This guide walks you through the right way to fill, balance, and start your pool so you're swimming safely within a day or two, not a week.
Cloudy pool water is frustrating, but it almost always comes down to a handful of fixable causes: low chlorine, unbalanced pH or alkalinity, a clogged filter, or fine particles the filter can't catch. This post walks through how to figure out which one is your problem and the fastest way to clear it up.
Pool pH should stay between 7.4 and 7.6. Outside that range, chlorine loses effectiveness and swimmers feel it immediately. This guide covers what moves your pH, how to raise or lower it correctly, and the most common adjustment mistakes.
High pool pH kills chlorine effectiveness and leaves swimmers with itchy eyes and cloudy water. This guide walks you through exactly how to lower pool pH safely, which chemical to use, how much to add, and the mistakes that make things worse before they get better.
Phosphates don't directly cloud your water or hurt swimmers, but they do feed algae. Whether you need to treat them depends on your chlorine levels and how often you're fighting algae. Here's a clear-headed look at what phosphates actually do and when a phosphate remover is worth your money.
Starting with an above-ground pool can feel overwhelming when you're staring at a wall of chemical options. This guide covers exactly which chemicals matter, what order to add them, and the target numbers to aim for. Simple, specific, and skips the stuff you don't need yet.
Most pool owners run their pump too long in spring and not long enough in summer. The right daily runtime depends on your pool's volume, your pump's flow rate, and the time of year. This guide gives you the actual math and a practical schedule to follow.
Adding chemicals to your pool doesn't mean you're done for the day. Each chemical has a different wait time before swimming is safe, ranging from 15 minutes for algaecide to 24 hours after a heavy shock treatment. This guide breaks it down by chemical so you know exactly when it's safe to jump back in.
Salt pools and chlorine pools are more similar than the marketing suggests — both rely on chlorine to sanitize your water. The real differences show up in upfront cost, day-to-day maintenance, and long-term equipment wear. This breakdown covers what actually changes so you can make the right call for your situation.
Backwashing a sand filter is simple, but most pool owners either do it too often, not long enough, or skip the rinse cycle that actually matters. This guide walks through the correct process step by step, including the mistakes worth avoiding.